CBLGT - 118WS, PROCESS 44CDR-AR COLOR DEVELOPER (SUPDAT)

  • MSDS: CBLGT
  • Manufacturer: MILES INC
  • Product Name: 118WS, PROCESS 44CDR-AR COLOR DEVELOPER (SUPDAT)
  • National Stock Number: 6750-00N070151
Product Identification

Product ID:118WS, PROCESS 44CDR-AR COLOR DEVELOPER (SUPDAT)
MSDS Date:11/01/1993
FSC:6750
NIIN:00N070151
MSDS Number: CBLGT

Responsible Party
MILES INC
100 CHALLENGER RD
RIDGEFIELD PARK, NJ 07660
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 201-440-2500

Cage: MILES

Contractor
MILES INC
PITTSBURGH, PA 15205-9741 US

Telephone: 800-662-2927

Cage: MILES

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 90-95%

OSHA PEL N/K

ACGIH TLV: N/K


POTASSIUM SULFITE

CAS: 10117-38-1

RTECS: WT3530000

Fraction By Weight: 1-5%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:MAY CAUSE IRRITATION.
SKIN:MAY CAUSE IRRITATION. INHALATION:INHALATION OF MIST COULD
CAUSE RESPIRATORY IRRITATION. INGESTION:MAY CAUSE IRRITATION OF THE
MUCOUS MEMBRANES OR DIGESTIVE TRACT. CHRONIC:NONE LISTED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:IMMEDIATELY FLUSH WITH PLENTY OF RUNNING WATER FOR AT
LEAST 15 MINUTES. OBTAIN MEDICAL ATTENTION. SKIN:FLUSH AFFECTED
AREAS PROMPTLY WITH WATER FOR 15 MINUTES. REMOVE CONTAMINATED
CLOTHING. IN CA SE OF CONTINUED IRRITATION CONSULT PHYSICIAN.
INHAL:FOR OVER-EXPOSURE, REMOVE TO FRESH AIR. INGEST:OBTAIN
IMMEDIATE MEDICAL ATTENTION.

Fire Fighting

Flash Point:NONCOMBUSTIBLE
Extinguishing Media:ANY APPLICABLE TO PRIMARY CAUSE OF FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . EVACUATE PERSONNEL TO A SAFE AREA. KEEP PERSONNEL
REMOVED AND UPWIND OF FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION EMISSION OF
TOXIC FUMES OF SO*2 IS POSSIBLE. SOME OF THESE MATERIALS MAY BURN
BUT NONE OF THEM IGNITES READILY.

Accidental Release

Spill Release Procedures:NOTE:REVIEW SECTIONS FIRE FIGHTING MEASURES &
EXPOS CTLS/PERSONAL PROT BEFORE PROCEEDING W/CLEAN UP. USE APPROP
PERSONAL PROT EQUIP DURING CLEAN UP. DIKE SPILL. PVNT LIQ FROM
ENTERING SEWERS, WATERWAY S OR LOW AREAS. SOAK UP WITH SAWDUST,
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID EYE AND SKIN CONTACT, AND STORE
IN WELL-VENTILATED AREA. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions:DO NOT STORE WITH INCOMPATIBLE MATERIALS (SEE SECTION
STABILITY AND REACTIVITY).

Exposure Controls

Respiratory Protection:NONE NEEDED WITH WORKING MIXTURES AND NORMAL
ROOM VENTILATION (10 CHANGES OF AIR PER HOUR). NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:ROOM VENT IS SUFFICIENT. AVOID USE OF PROD IN UNVENTILATED
AREAS. ALWAYS CTL AIRBORNE LEVELS BELOW EXPOSURE (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:CHEM RESIST APRONS. DISPOSABLE COVERALLS ARE
OPTIONAL, & DISCARD AFTER USE. ANSI APPRVD EYE WASH & DELUGE SHOWER
.
Work Hygienic Practices:DO NOT STORE OR CONSUME FOOD, DRINK OR TOBACCO
IN AREA WHERE THEY MAY BECOME CONTAMINATED WITH THIS MATERIAL.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:REPLENISHER WORKING STRENGTH.
PH:12.20(REPL)/12.05(DEV). SPILL RELEASE:SAND, OIL DRY OR OTHER
ABSORBENT MATERIAL. WASTE DISP METH:LANDFILL. DISCHARGE TO SEWER
REQS APPROVAL OF P ERMITTING AUTHORITY & MAY REQ PRETREATMENT.
VENT:GUIDELINES WHEN REPORTED IN INGRED SECTION (USE 50% OF THE
TLV).

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
pH:SUPDAT
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:100% (BY WEIGHT %)
Appearance and Odor:CLEAR AND LIGHT YELLOW LIQUID, NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES, CO*2, CO.

Disposal

Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOC REGS .
RECOVER NONUSABLE FREE LIQ &/OR CONTAMD WATER, & DISPOSE OF IN
APPRVD & PERMITTED TREATMENT SYS; INCIN IS REC. REMOVE NONUSABLE
SOLID MATL &/OR CONTAMD SOIL, FOR DISP IN APPRVD & PERMITTED
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.